Define logical drives using the space in the arrays.Designate hard drives as hot spares (optional).See Selecting a Configuration Method in this section for more information. Select a configuration method to create arrays using the available physical drives.Perform the following steps to configure arrays and logical drives: If you do not press within a few seconds of the prompt, the system continues the boot procedure.Īfter you press, the Management Menu screen displays. Press to Enable BIOS Configuration Utilityįor each PERC controller in the host system, the firmware version, dynamic random access memory (DRAM) size, and the status of logical drives on that controller display. HA -0 (Bus 1 Dev 6) Type: PERC 4 Standard FW x.xx SDRAM=128MBĠ Logical Drives found on the Host AdapterĪdapter BIOS Disabled, No Logical Drives handled by BIOS When the host system boots, hold the key and press the key when the following appears: Verify that the redundancy data in logical drives using RAID level 1 or 5 is correct.Access controllers, logical drives, and, physical drives individually.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |